What is the reason for the skidding of conveyor belts?

When the conveyor belt is in normal operation, the belt speed is not less than 95% of the idler speed. If the friction between the idler and the conveyor belt is not enough, the conveyor belt tends to slip. There are many reasons that cause the friction force between the conveyor belt and the idler to be insufficient. Commonly there are: insufficient tension, load start, and insufficient friction coefficient on the idler surface.
The reasons for insufficient tension include insufficient tensioning stroke, insufficient weight of the counterweight, and long conveyor belts.
The reason why the friction coefficient of the roller surface is not enough is that the roller surface is covered with too much wear, the belt body is wet or sticky with lubricating oil, and the body surface of the belt is affixed with materials.

Titanium Plates & Sheets

Titanium Plates,Titanium Sheets,Mirror Titanium Plate,Pure Titanium Plate

Baoji Yongshengtai Titanium Industry Co., Ltd. , https://www.bjystititanium.com

Posted on